BK-918 3G/HD/SD_SDI Splitter 1 x 8 Supports 5-12V Wide Voltage Input And 2.97Gbps Bandwidth / Built-in clock recovery and drive

BK-918 3G / HD / SD_SDI Splitter 1 x 8 prend en charge une entrée de tension large de 5 à 12 V et une bande passante de 2,97 Gbps / récupération d'horloge intégrée et lecteur

I. Introduction

1×8 SDI splitter distributes allows 1 SDI, HD-SDI or 3G-SDI video source to 8 SDI/HD-SDI/3G-SDI displays simultaneously. This product built-in automatic identification and compatible with SD-SDI, HD-SDI, 3G-SDI all format of SDI signal. It is the support 2.97Gbps bandwidth, and supports lossless transmission over long distances.

II. Features

1. 1 SDI input signal split to 8 SDI sink devices.
2. Supports SD-SDI(270Mb/s), HD-SDI(1.485Gb/s), 3G-SDI(2.97Gb/s) video format.
3. Built-in cable equilibrium, clock recovery and drive.
4. Supports resolutions up to 1920x1080@60Hz.
5. Supports signal input and output distances of up to 300m for SD signals, 200m for HD signals and 100m for 3G signals.
6. Supports 5-12V wide voltage input.

III. Package

1. 1x8 SDI Splitter --------------------------------------------------- 1PCS
2. 5V1A DC Power Supply adapter ----------------------------- 1PCS
3. Operation Manual ------------------------------------------------ 1PCS

IV. Specifications

1. Frequency Bandwidth :3Gbps
2. SDI Splitter Input Ports :1 x BNC Female input port                                         
3. SDI Splitter Output Ports :8 x BNC Female output ports
4. Power Supply :DC 5V 1A
5. ESD Protection Human Body Model :± 8kV (air-gap discharge)  ± 4kV (contact discharge)
6. Dimensions (mm) :90(W) X 229 (D) X 25 (H)
7. Weight :476g
8. Operating Temperature :0°C ~ 40°C / 32°F ~ 104°F
9. Storage Temperature :-20°C ~ 60°C / -4°F ~ 140°F
10. Relative Humidity :20 ~ 90% RH (Non-condensing)
11. Power Consumption (Max) :1.5W

V. Operation controls and Functions

Front Panel

1. ON/OFF: Power on/off switch.
2. POWER LED: This red LED illuminate when the device is connected with power supply.
3. LOCK LED: This red LED illuminate when the SDI signal plug in.

Rear Panel

1. SDI INPUT: This slot is where you connect the SDI source output from SDI Camera.
2. SDI OUTPUT: These slots are where you connect the SDI displays or monitors with coaxial cable (RG6).
3. DC 5V-12V: Plug the 5V or 12V DC power supply into the unit and connect the adapter to AC wall outlet.

VI. Application Example